Helpful Product Review
Friday, May 7, 2021
BT280 Power Circuit Probe Kit, 9-30V Automotive Electrical System Diagno...
AUTOOL BT660 Battery Tester Automotive 12V/24V Car Battery Load Tester with Printer 100-3000CCA
BT660 Battery Tester Automotive 12V/24V Car Battery Load Tester with Printer 100-3000CCA
buy it on amazon.com:
Digital Auto Cranking Charging System Tester with 3 Rolls Paper for Car Truck Motorcycle ATV SUV Boat Yacht
- 1.[Battery Tester Automotive]:BT660 Car Battery Load Tester with Printer is used for lead-acid starting battery, regular flooded, AGM flat plate, AGM Spiral, GEL and EFB. Applying the advanced conductance testing technology and built-in thermal printer, BT660 can give you accurate testing results and print it in seconds.
- 2.[Multifonction]: BT660 Car Battery Load Tester has the following functions:Battery Test, Cranking Test, Charging Test, Review Data, Print Data, Export Data to Computer,ect.It can help you to measure car battery problems more quickly and accurately.
- 3.[BUILT-IN PRINTER & DATA DOWNLOAD]:Quick and accurate test result in LCD display just millseconds, with printer you are allowed to review the result date and print the result report. Plus when it connects to a PC via a USB port, you can save data for easy reference next time.
- 4.[BATTERY TROUBLE SHOOTING]:Test standards include most battery standards in the world, CCA IEC EN DIN JIS and OTHER SPECIES. Super wide range pro tester rated from 100 to 3000 CCA. Compatible with cars, motorcycles, trucks, RVs, ATVs, SUVs, boats, yachts, mowers and even golf carts. With Polarity Reverse Protection, both the battery and device won’t be damaged.
- 5.[MULTI-LANGUAGE SUPPORT]: BT660 Car Battery Tester Analyzer is available in the following five languages. Available in English, Spanish, German, French, Polish and Italian.
-
- Main Functions:
① Battery Test:It mainly targeted to analyze the battery healthy status.
② Cranking Test:It is mainly to test and analyze the starting motor.
③ Charging Test:This is to check and analyze the charging system, including generator, rectifier, rectifier diode, etc.
④ Review Data: After entering the forth function, then press OK key you can view the final test result.
⑤ Print Data:You can print final data after all test has done. But it need you contact with customer service.
⑥ Export Data to Computer:Contact this battery tester to computer with Data Line. ⑦ Time Adjustment: you can adjust time by your needs.
⑧Wide Measure Standard:
CCA : 100-3000
BCI : 100-3000
CA : 100-3000
MCA : 100-3000
JIS : 26A17--245H52
DIN : 100-2500
IEC : 100-2500
EN : 100-2500
SAE :100-3000
GB : 30AH-220AH
Features and Benefits:
*Multiple vehicle applications: Cpassenger cars and duty trucks
*Tests batteries from rated from 100 to 3000CCA
*Additional diode test
*Tests multiple battery types including regular flooded, AGM flat plate , AGM spiral and gel
*Tests the batteries on the car directly- no need to remove the battery *Detects bad cells*Quick and accurate test result display in just 3 seconds
*Advanced starter /alternator test
*Quick starter analysis without disabling the ignition*Does not emit light, heat or spark , or discharge battery-keeps operation safe for all levels of users
*System time adjustment
*Built in printer for direct data printing
Specifications:
Working Environment Temp:-12℃-50℃
Special test clip: Double conductance Kelvin clamp
Housing Material: Acid-resistant ABS plastic
Measure Range: 30AH-200AH
Voltage Measure Range: 7-30VDC
Packing List:
1pc*BT660 Car Battery Load Tester
2pcs* Full copper core kelvin clip
1pc* Manual
1pc* USB Cable
3pcs*Printer Paper Thermal Paper
Thursday, September 24, 2020
MR CARTOOL Autool 12V/24V Vehicle Jump Starter 400A, Car Battery Charger Adapter 20A Lead-Acid Batteries Charging Devices
MR CARTOOL Autool 12V/24V Vehicle Jump Starter 400A, Car Battery Charger Adapter 20A Lead-Acid Batteries Charging Devices for Car,Motorcycle,Lawn Mower,Boat RV,SUV,ATV
buy it from amazon: https://www.amazon.com/dp/B08BRCJDT8?ref=myi_title_dp -
Convenient and Faster : The Car battery Charger charging current can be
adjusted within the range of 20 A. voltage: 12V/24V . Charging time and
power are twice as fast as traditional machines
-
Self-protection Design: The Car battery Charger adopts smart temperature
control, fan cooling and automatic shutdown protection in over-heat.
-
New jump Starter Tech: The car jump starter power supply is safe; no
need to charge, ultra-low temperature start. smaller, lighter and the
power is larger.
-
Quality Material: Long service life and maintenance-free, to solve the problem that the car engine starting and charging .
-
Autool warranty: 3 year warranty for products, 1 year warranty for accessory. if any problem, please Email us.
-
-
EM 315 Charging/jump start double- function machine
For starting the vehicle, press the button “Charge/ Start”to “Start” to function.
Charging:
This Car Charging device supports 12V and 24V lead-acid battery
charging. Before charging 12V batteries, the function switch should be
set to “12V”. Before charging 24V batteries, the function switch should
be set to “24V”.
jump starter:
This car jump starter
supports 12V and 24V lead-acid battery charging. Before starting
vehicle, press/set the function button to “Starter” button. The
positive(+) and negative(-) power pole share both charging and starting
function.
O.C. means the over-current protection indicator.
Technical Parameters :
Type:EM 315 (USA)
Input rated voltage:110 V±15%
Input frequency:50 Hz - 60Hz
Rated input power:2.5 KVA
Charging current :20 A
Charging voltage:12 V~24V
Starting current:400 A
Starting voltage:12 V~24V
Starting no-load voltage:15 V~30V
Charging no-load voltage:15 V~30V
No-load loss :30 W
Effectiveness (%): 85%
Power factor:0 .73
Insulation grade :F
Enclosure protection rating:IP 21S
Gross weight:8.4 kg/ 18.52 lb
Net weight:6.65kg/ 14.67 lb
Dimensions (cm): 46.5*33*26.5 cm
Package List:
1x charging/starting device 1x Power cord with (+)clamp for charging/starting
1x Power cord with (-)clamp for charging/starting
1x Manual
1x Quality certificate
- Convenient and Faster : The Car battery Charger charging current can be adjusted within the range of 20 A. voltage: 12V/24V . Charging time and power are twice as fast as traditional machines
- Self-protection Design: The Car battery Charger adopts smart temperature control, fan cooling and automatic shutdown protection in over-heat.
- New jump Starter Tech: The car jump starter power supply is safe; no need to charge, ultra-low temperature start. smaller, lighter and the power is larger.
- Quality Material: Long service life and maintenance-free, to solve the problem that the car engine starting and charging .
- Autool warranty: 3 year warranty for products, 1 year warranty for accessory. if any problem, please Email us.
- EM 315 Charging/jump start double- function machine
For starting the vehicle, press the button “Charge/ Start”to “Start” to function.
Charging:
This Car Charging device supports 12V and 24V lead-acid battery charging. Before charging 12V batteries, the function switch should be set to “12V”. Before charging 24V batteries, the function switch should be set to “24V”.
jump starter:
This car jump starter supports 12V and 24V lead-acid battery charging. Before starting vehicle, press/set the function button to “Starter” button. The positive(+) and negative(-) power pole share both charging and starting function.
O.C. means the over-current protection indicator.
Technical Parameters :
Type:EM 315 (USA)
Input rated voltage:110 V±15%
Input frequency:50 Hz - 60Hz
Rated input power:2.5 KVA
Charging current :20 A
Charging voltage:12 V~24V
Starting current:400 A
Starting voltage:12 V~24V
Starting no-load voltage:15 V~30V
Charging no-load voltage:15 V~30V
No-load loss :30 W
Effectiveness (%): 85%
Power factor:0 .73
Insulation grade :F
Enclosure protection rating:IP 21S
Gross weight:8.4 kg/ 18.52 lb
Net weight:6.65kg/ 14.67 lb
Dimensions (cm): 46.5*33*26.5 cm
Package List:
1x charging/starting device 1x Power cord with (+)clamp for charging/starting
1x Power cord with (-)clamp for charging/starting
1x Manual
1x Quality certificate
EWM518 110V Welding Machine MIG, 30-90A IGBT Inverter Welder Machine 50/60 (Hz) Automatic Feed Flux Core Wire Welder No Gass
EWM518 110V Welding Machine MIG, 30-90A IGBT Inverter Welder Machine 50/60 (Hz) Automatic Feed Flux Core Wire Welder No Gass for Welding DIY
buy it from amazon: https://www.amazon.com/dp/B08BRH5FYN?ref=myi_title_dp&th=1 -
Safe and fast welding: The Autool EWM518 welding machine adopts 8mm
flux-cored welding wire for welding wire, no extra gas is needed. The
flux-cored welding wire is stable, the feeding speed is fast, and the
work is safer and faster, electromagnetic noise free.
-
High technology: The Autool EWM518 self-protecting flux-cored wire
welder is equipped with a unique electronic reactor circuit, which can
accurately control short circuit transfer and hybrid transmission to
bring better performance than other machines.
-
Scope of application: The Autool EWM518 welder machine is suitable for
welding all materials below 8mm, portable, compact design, very suitable
for home use and DIY handcraft enthusiasts.
-
High energy efficiency conversion: The Autool EWM518 welder machine has
an energy conversion ratio of more than 80%, which greatly improves work
efficiency and reduces the loss of electrical energy. High working
efficiency, both energy saving and environmental protection.
-
Warranty: The Autool EWM518 welding machine has a 3-year warranty on the
body and a 1-year warranty on product accessories. The super high
quality and good customer service make you worry-free.
-
- Product introduction:
The Autool EWM518 welding machine applies the most advanced inversion technology.
The principle of inversion is to transform the power frequency of 50Hz/ 60Hz into direct current
and invert it into high frequency through high-power device IGBT, then perform voltage-drop and
commutation with the output high-power D.C power supply via Pulse Width Modulation (PWM).
Since the switch power inversion technology is adopted, the weight and volume decrease
greatly while the conversion efficiency increase of more than 30%. The
machine is self-shielded flux cored welding machine, which is equipped
with unique
electronic reactor circuit, which can precisely control the short-circuiting transfer and mixed
transfer resulted in better performance than other machines. Compared with silicon controlled
welding machine and tapped welding, our products have the following advantages: stable wire
feed rate, portable, energy-saving, electromagnetic noise free.
Technical parameters:
Item EWM518
Power supply(V) 1 phases 120V±15%
Frequency(Hz) 50/60
No-load voltage(V) 55
Rated input current(A) 20
Output current adjustment
range(A) 30 - 90
Output voltage(V) 15.5 - 18.5
Duty cycle 25%
Power factor >0.7
Efficiency(%) ≥80
Type of the wire feeder Internal
Welding-wire diameter (mm) 0.8
Insulation grade F
Protection grade IP21S
Weight without wire roller(kg) 5.5
Dimension
(L*W*H mm) 360*135*240
Packing:
1 x Autool EWM518 welding machine
- Safe and fast welding: The Autool EWM518 welding machine adopts 8mm flux-cored welding wire for welding wire, no extra gas is needed. The flux-cored welding wire is stable, the feeding speed is fast, and the work is safer and faster, electromagnetic noise free.
- High technology: The Autool EWM518 self-protecting flux-cored wire welder is equipped with a unique electronic reactor circuit, which can accurately control short circuit transfer and hybrid transmission to bring better performance than other machines.
- Scope of application: The Autool EWM518 welder machine is suitable for welding all materials below 8mm, portable, compact design, very suitable for home use and DIY handcraft enthusiasts.
- High energy efficiency conversion: The Autool EWM518 welder machine has an energy conversion ratio of more than 80%, which greatly improves work efficiency and reduces the loss of electrical energy. High working efficiency, both energy saving and environmental protection.
- Warranty: The Autool EWM518 welding machine has a 3-year warranty on the body and a 1-year warranty on product accessories. The super high quality and good customer service make you worry-free.
- Product introduction:
The Autool EWM518 welding machine applies the most advanced inversion technology.
The principle of inversion is to transform the power frequency of 50Hz/ 60Hz into direct current
and invert it into high frequency through high-power device IGBT, then perform voltage-drop and
commutation with the output high-power D.C power supply via Pulse Width Modulation (PWM).
Since the switch power inversion technology is adopted, the weight and volume decrease
greatly while the conversion efficiency increase of more than 30%. The machine is self-shielded flux cored welding machine, which is equipped with unique
electronic reactor circuit, which can precisely control the short-circuiting transfer and mixed
transfer resulted in better performance than other machines. Compared with silicon controlled
welding machine and tapped welding, our products have the following advantages: stable wire
feed rate, portable, energy-saving, electromagnetic noise free.
Technical parameters:
Item EWM518
Power supply(V) 1 phases 120V±15%
Frequency(Hz) 50/60
No-load voltage(V) 55
Rated input current(A) 20
Output current adjustment
range(A) 30 - 90
Output voltage(V) 15.5 - 18.5
Duty cycle 25%
Power factor >0.7
Efficiency(%) ≥80
Type of the wire feeder Internal
Welding-wire diameter (mm) 0.8
Insulation grade F
Protection grade IP21S
Weight without wire roller(kg) 5.5
Dimension
(L*W*H mm) 360*135*240
Packing:
1 x Autool EWM518 welding machine
Autool EWM309 60~180A IGBT Welder Machine 12V/24V Steel Welder Noise-canceling
Autool EWM309 60~180A IGBT Welder Machine 12V/24V Steel Welder Noise-canceling
buy it from amazon: https://www.amazon.com/dp/B08BZ57HGW?ref=myi_title_dp&th=1
- High frequency 24V inverters welding machine, Outstanding energy efficiency, which reduce the consumption of copper and steel significantly and improve the overall efficiency of the welding machine incredibly.
- Low switching frequency, which almost eliminates noise pollution. Excellent insulating capability; Brilliant design with great anti-static and anti-corrosion performance.
- Can be widely used for the welding on various acidic and alkaline stick electrodes.Characteristics of easy arc starting, small amount of spatter, stable current and good weld shape.
- High efficiency, energy saving, lightweight, high dynamic performance, good arc stability and easy control of the molten pool. It has high no-load voltage and good thrust compensation.
- It has a wide application range, and can be used for working at heights, fieldwork as well as indoor and outdoor decorations, etc.
Advanced MOS Inverter Technology with High-level Control method
Advanced control methods significantly improve the performance of the welding machine and fulfill the welding process requirements better.
Warranty:
From the date of receipt, we provide a 3-year limited warranty for the main unit, and 1-year limited warranty for the accessories.
Ain Technical Parameters
Model:EWM 309
Rated input voltage(V):DC 24V
Rated input power(KVA):2.2
Rated input current(A):100
Rated output current/voltage:82A/23.3V
Welding current adjustment range (A):20~82
No-load voltage:80
Rated load duration:30﹪
Overall efficiency (﹪):85
Enclosure rating:IP23
Insulation class:F
Dimensions:288×135×213
Weight:4.16Kg
Quick Reference Table for Welding Process (Parameters in this table are for reference only)
steel size:1.0MM, current: 20~60A, volatge: 20.8~22.4V
steel size:1.6MM, current:44~84A, volatge: 21.76~23.36V
steel size:2.0MM, current:60~100A, volatge: 22.4~24.0V
steel size:2.5MM, current:80~120A,volatge: 23.2~24.8V
steel size:3.2MM,current:108~148A,volatge: 23.32~24.92V
steel size:4.0MM,current:140~180A, volatge: 24.6~27.2V
Note: This table only applies to welding of low-carbon steel. For other materials, please refer to the relevant documents and operation manuals.
Please read user manul clearly before use this product! ONLY professional user can handle this welder.
Tuesday, September 15, 2020
AUTOOL BT380 12V Car Battery Tester 100-2400CCA Car Battery Charger Tool Automotive Cranking and Charging System Analyzer Vehicle Battery Charger for Cars, Trucks, Motorcycle, Boat,Yatch
AUTOOL BT380 12V Car Battery Tester 100-2400CCA Car Battery Charger Tool
BUY IT FROM AMAZON.COM:
https://www.amazon.com/AUTOOL-100-2400CCA-Charging-Automotive-Motorcycle/dp/B08F9Z1372/ref=sr_1_1?dchild=1&keywords=BT380&qid=1600226144&sr=8-1
Test all automotive cranking lead acid battery, including lead-acid batteries, AGM flat plate batteries, AGM spiral batteries and GEL batteries
Testing standards include currently the world's majority of battery standards, CCA, JIS, DIN, IEC, EN, SAE, GB.
Main functions of BT-380 battery tester include: Tests the starting
system, charging system and starting lead-acid batteries, Directly
detect bad cell battery. Battery charging .
Polarity reverse connection protection, reverse connection will not
damage the tester or affect the vehicle and battery. Directly test the
battery with power shortage, no need to fully charge it before testing.
It adopts the most advanced conductance measurement technology, which can easily, quickly and accurately test the vehicle starting system, vehicle charging system and vehicle battery as well as recharge the 12V vehicle battery.
BT380 can help maintenance personnel to find
problem quickly and accurately, thus achieving fast vehicle maintenance
and repair.
Operating Parameters:
Input voltage: 100VAC-240VAC
Charging voltage: 14.70V
Maximum charging current: 3A
Power requirement: No built-in battery is needed. It will light up during testing period when connected to the power source.
Testing:
CCA100〜2400,BCI100-2400,CA100-2400,MAC100-2400,JIS26A17-245H52,DIN100-2200,IEC100-2200,EN100-2400,SAE100-2400,
Ah range: 30-220Ah
Operating temperature: -20°C-50°C
Note: CCA100-2000, 30-220Ah, this is the highest CCA in the market.
Package Includes:
1 x BT380,
1 x Battery Clamp Cable,
1 x User Manual
3 year warranty for replacement of body, 1 year warranty for accessories.