EWM518 110V Welding Machine MIG, 30-90A IGBT Inverter Welder Machine 50/60 (Hz) Automatic Feed Flux Core Wire Welder No Gass for Welding DIY
buy it from amazon: https://www.amazon.com/dp/B08BRH5FYN?ref=myi_title_dp&th=1 -
Safe and fast welding: The Autool EWM518 welding machine adopts 8mm
flux-cored welding wire for welding wire, no extra gas is needed. The
flux-cored welding wire is stable, the feeding speed is fast, and the
work is safer and faster, electromagnetic noise free.
-
High technology: The Autool EWM518 self-protecting flux-cored wire
welder is equipped with a unique electronic reactor circuit, which can
accurately control short circuit transfer and hybrid transmission to
bring better performance than other machines.
-
Scope of application: The Autool EWM518 welder machine is suitable for
welding all materials below 8mm, portable, compact design, very suitable
for home use and DIY handcraft enthusiasts.
-
High energy efficiency conversion: The Autool EWM518 welder machine has
an energy conversion ratio of more than 80%, which greatly improves work
efficiency and reduces the loss of electrical energy. High working
efficiency, both energy saving and environmental protection.
-
Warranty: The Autool EWM518 welding machine has a 3-year warranty on the
body and a 1-year warranty on product accessories. The super high
quality and good customer service make you worry-free.
-
- Product introduction:
The Autool EWM518 welding machine applies the most advanced inversion technology.
The principle of inversion is to transform the power frequency of 50Hz/ 60Hz into direct current
and invert it into high frequency through high-power device IGBT, then perform voltage-drop and
commutation with the output high-power D.C power supply via Pulse Width Modulation (PWM).
Since the switch power inversion technology is adopted, the weight and volume decrease
greatly while the conversion efficiency increase of more than 30%. The
machine is self-shielded flux cored welding machine, which is equipped
with unique
electronic reactor circuit, which can precisely control the short-circuiting transfer and mixed
transfer resulted in better performance than other machines. Compared with silicon controlled
welding machine and tapped welding, our products have the following advantages: stable wire
feed rate, portable, energy-saving, electromagnetic noise free.
Technical parameters:
Item EWM518
Power supply(V) 1 phases 120V±15%
Frequency(Hz) 50/60
No-load voltage(V) 55
Rated input current(A) 20
Output current adjustment
range(A) 30 - 90
Output voltage(V) 15.5 - 18.5
Duty cycle 25%
Power factor >0.7
Efficiency(%) ≥80
Type of the wire feeder Internal
Welding-wire diameter (mm) 0.8
Insulation grade F
Protection grade IP21S
Weight without wire roller(kg) 5.5
Dimension
(L*W*H mm) 360*135*240
Packing:
1 x Autool EWM518 welding machine
- Safe and fast welding: The Autool EWM518 welding machine adopts 8mm flux-cored welding wire for welding wire, no extra gas is needed. The flux-cored welding wire is stable, the feeding speed is fast, and the work is safer and faster, electromagnetic noise free.
- High technology: The Autool EWM518 self-protecting flux-cored wire welder is equipped with a unique electronic reactor circuit, which can accurately control short circuit transfer and hybrid transmission to bring better performance than other machines.
- Scope of application: The Autool EWM518 welder machine is suitable for welding all materials below 8mm, portable, compact design, very suitable for home use and DIY handcraft enthusiasts.
- High energy efficiency conversion: The Autool EWM518 welder machine has an energy conversion ratio of more than 80%, which greatly improves work efficiency and reduces the loss of electrical energy. High working efficiency, both energy saving and environmental protection.
- Warranty: The Autool EWM518 welding machine has a 3-year warranty on the body and a 1-year warranty on product accessories. The super high quality and good customer service make you worry-free.
- Product introduction:
The Autool EWM518 welding machine applies the most advanced inversion technology.
The principle of inversion is to transform the power frequency of 50Hz/ 60Hz into direct current
and invert it into high frequency through high-power device IGBT, then perform voltage-drop and
commutation with the output high-power D.C power supply via Pulse Width Modulation (PWM).
Since the switch power inversion technology is adopted, the weight and volume decrease
greatly while the conversion efficiency increase of more than 30%. The machine is self-shielded flux cored welding machine, which is equipped with unique
electronic reactor circuit, which can precisely control the short-circuiting transfer and mixed
transfer resulted in better performance than other machines. Compared with silicon controlled
welding machine and tapped welding, our products have the following advantages: stable wire
feed rate, portable, energy-saving, electromagnetic noise free.
Technical parameters:
Item EWM518
Power supply(V) 1 phases 120V±15%
Frequency(Hz) 50/60
No-load voltage(V) 55
Rated input current(A) 20
Output current adjustment
range(A) 30 - 90
Output voltage(V) 15.5 - 18.5
Duty cycle 25%
Power factor >0.7
Efficiency(%) ≥80
Type of the wire feeder Internal
Welding-wire diameter (mm) 0.8
Insulation grade F
Protection grade IP21S
Weight without wire roller(kg) 5.5
Dimension
(L*W*H mm) 360*135*240
Packing:
1 x Autool EWM518 welding machine
No comments:
Post a Comment