How to maintain your expensive fidget spinner?
The fidget spinner is a small toy that has been popular for these days. Its appearance is small and exquisite, and it is simple to operate. It can help killing time and also can be used to release the pressure. But Fidget spinner will rust or dirty though a long time use ,especially the steel bearing which will affect spin time. Then you need to know regular maintenance. And how can the fidget spinner be maintained? How do you usually clean it? The following is some personal advice on the maintenance and cleaning of the fidget spinner. hoping this will be helpful for those in need.
Cleaning Tools:
1. Alcohol/anhydrous ethanol/ lighter oil / detergent.(one of them)
2. hair dryer.
Question NO.1 : Fidget spinner spin time decreasing? Lighter oil will solve your problem.
lighter oil can be bought in the supermarket and could apply to most of the metal fidget spinner bearings . It is recommended if you find the Fidget Spinner Spin speed slows down , the spin time becomes shorter, or the bearing covered with ash. You can drop the lighter oil on the bearing to clean it or put the lighter oil in the container, then remove the bearing and soak the entire bearing in the lighter oil directly while cleaning, then dry it with the hair dryer. Fidget Spinner can be restored to the original state of Spins.
Lighter Oil
Question NO.2 : Fidget Spinner Metal bearings rust? use alcohol to clean and maintenance
When your bearing is rust, You can use high purity alcohol or ethanol to clean the gyro bearings, And the ceramic, metal bearings or mixed material bearings all can be cleaned with alcohol, lighter oil or high purity alcohol. And we mentioned about how to clean bearing above, so there is no explain anymore. Also Notice that the metal bearing’s best choice is Anhydrous ethanol
Anhydrous ethanol
Question No.3: Ceramic bearing is easy to maintain, free to wash with water and detergent
Ceramics do not rust like metal bearings, usually with water or detergent cleaning and maintenance is possible. just remove the ceramic bearings screwed down, then drop a few detergent with warm water flush away. Then dry it or dry after the re-installed. It will works Good as Before. Also note that if the detergent is not washed away entirely. it may affect the fidget spinner spin time and speed. So be sure to rinse for a while.
Question No.4 : Do not use lubricating oil or water to clean the metal Bearings
Lubricants can not be used to miantian Whether metal or ceramic bearings ! This point must be noted that otherwise it may affect the spin time of the fidget spinner. And metal bearings washed by water may rust, So do not use water to clean it. If Metal fidget spinner fell Water inadvertently , be sure to dry it as soon as possible after the use of alcohol to clean . so that the metal bearing moisture will evaporate and restore the original state
Question No.5: Put in fidget spinner in the case or naked on the desk? Put in the case, to avoid sticky ash
If you do not intend to play the fidget spinner in the near future. it is best to store it in a clean, do not fall ash and will not wet place. it is recommended to buy a dust bag or dust box. Put Fidget spinner into the bag or box in a safe place when not ply to avoid dust or water buildup in the bearing and thus affect the rotation time and speed of the fidget spinner
Question NO.6: How Do i Avoid fidget spinner broken? Buy a stronger one or play it carefully!
Many of the new goggles of the fidget spinner make everyone imitate. Many novice because they are not skilled in the operation and often make the Spinner fell to the ground which is possible to make the fidget spinner bearing broken or deformation. In order to avoid the this trouble, you can practice on a soft grass, or buy a Fidget Spinner strong enough
Question NO.7: What should i do if Fidget Spinner Stop Spinning? Bought a new bearing with same size as old one.
If the fidget spinner in the fall after no matter how cleaning and maintenance are no longer Spin, then the bearing may no longer be used. it is recommended that the best way to buy a new bearing to replace the old one as long as the measurement size is the same of original bearing size. Another Bearings can be equipped with a lot of different material bearing, as long as the size of the model can be installed on the right. So you can choose your favorite material when replacing the bearing.
Thanks a lot for your time to read. And here are some fidget spinner with good quality which i loved most.
If you like them, you can see more from Link below:
Coin Series:
Multicolor series:
Gold Series:
https://www.amazon.com/Fidget-Spinner-Aemotoy-Metal-Hand/dp/B071HWSLTT/keywords=Metal+Fidget+Spinner
No comments:
Post a Comment